Product Information:
Battery grip with numerous control elements:
* better handling of the camera
* antislip surface
* for Nikon EN-EL3e, EN-EL4, EN-EL4a or 8 AA batteries
* two-step vertical release
* two thumb wheel
* AF-ON-button for focussing (autofocus)

Technical Details:
* Dimensions: 52 x 155 x 76 mm
* Weight: 290g

Scope of Delivery:
* Battery Grip
* AA battery holders, EN-EL3e battery holders, EN-EL3e Car Charger

Description:
This battery grip offers a better handling of the camera when you are holding the camera in a vertical position or using heavy lenses. Due to the antislip grip surface the camera lies safely in your hands.

The grip is equipped with a two-step release button that is easier to reach during portrait shots than the release button of the camera. In addition the battery grip has two thumb wheels and AF-ON-button for focussing. This control element performs the same operations as their counterpart on the camera. The shutter release lock locks the release button and control element.

The scope of delivery includes two changeable battery holders. They hold a Nikon EN-EL3e, EN-EL4, EN-EL4a rechargeable battery or eight AA batteries.

At the bottom side is a tripod socket where you can attach a tripod.

Replace the following part numbers:
NIKON
MB-D10, WTENIKD300A, STD-ND300

Compatible with the following models:
NIKON
D300, D700

Description:
Power Source: One PENTAX D-LI50 Rechargeable Li-ion Battery

Replace the following part numbers:
PENTAX
D-BG2, DBG2, WTEK10DA

Compatible with the following models:
PENTAX
K10D, K20D

Product Information :
Battery grip with numerous control elements:
better handling of the camera
antislip surface
It can hold 6 AA batteries or two LP-E5 batteries simultaneously
Dimensions: 130 x 103 x 80 mm
Weight: 240g

Description:
The battery Grip can hold One or two battery packs LP-E5 or six AA size batteries

It is with shutter and same functions as original grip Notice for Use:

Do not further push open the battery compartment cover when it is already open. Doing so may damage its hinge.

Before removing the battery grip from the camera, be sure to turn the camera\’s power switch to , and take out the batteries. After removing the batteries, attach the protective cover to the electrical contacts.

Be sure to attach the battery grip to the camera before inserting the batteries. The results of the battery check may not be displayed properly if you attach the battery grip to the camera with the batteries already inside.

If storing battery magazine separately, be sure to attach the provided protective cover or prevent shorting.

Fewer images can be shot when using size-AA batteries. Therefore, usage of size-AA batteries is recommended only for emergencies. With size-AA batteries, use six new batteries of the same brand at temperature above 20¡æ / 68¡ãF.The camera may not function when used in low temperature or old and new batteries are used together.

Scope of Delivery:
Battery Grip
AA battery holders, LP-E5 battery holders

Replace the following part numbers:
CANON
MK-450D, WTECAN450DA

Compatible with the following models:
CANON
Eos 1000D, Eos 450D, Eos 500D

Description:
It is with shutter and uses two BP-511 Lithium or six AA batteries.

Replace the following part numbers:
CANON
BG-E2, BG-E2N, BGE2, BGE2N, WTECAN40DA

Compatible with the following models:
CANON
EOS 20D, EOS 30D, EOS 40D, EOS 50D

Description:
This battery grip is 2100mAh capacity. Do not need to place 6 AA batteries or 2 NB-2LH batteries in it any more. The life of the battery grip is about 3-5 years.
There are car charger or wall charger which you can charge it directly.
It is with shutter.

Replace the following part numbers:
Canon BG-E3, Canon WTECAN350DC

Compatible with the following models:
CANON Eos 350D, Eos 400D